BEWARE: SheltaPod fully SOLD OUT in the summer of 2018 and there will limited stock in 2019 also, so Pre Order one NOW!
WINTER SALE NOW ON - 20% OFF ALL PREORDERS
SheltaPod - the campervan and vehicle awning that adapts to changing weather.
Works as a versatile sun canopy and/or half dome tent you can sleep in.
Attaches to almost any vehicle, lightweight, small pack size and comes with lots of accessories included in the bag!
2 in 1 shelter for your vehicle
sheltaPod is unique because it can offer campers the option of a simple sun canopy and/or a half dome tent. The fabric in each section can roll up and attach to the pole sleeve using several buckles and hooks. This concertina effect can be done in stages so the user can decide on how much cover they want. Each stage uses two pre-attached guy lines to keep the tent rigid and in place.
When it's time for bed
The inner tent with integrated bath-tub style groundsheet (included) can be clipped into the rainfly to provide a dry and cozy space for hanging out or sleeping. It has two mesh window panels with curtains, one on top for a view of the stars and the other at the back. This can provide better ventilation in hot climates. It also gives campers a view out when the rainfly is rolled up - perfect place to sit if there are lots of insects around.
The inner tent also has two doors, one mesh and the other fabric. Both have central zips and tiebacks.
The two tone Front Door Panel is designed to protect your stored equipment from both prying eyes and the weather when you don't want to use the inner tent. We also provide a separate groundsheet.
sheltaPod can attach to your vehicle using various different methods. For older campervans there is the gutter rail option (A) where a pole slides into the pole sleeve and then clamps securely inside the gutter (please note that the pole and clamps are not supplied with sheltaPod). For modern vans with an awning rail, there is also a bending strip that threads into the C channel (B). If you want to drive away then you also need a Kador strip and figure of eight which can been seen in the photo but does not come with sheltaPod. However we do supply 4 x five meter webbing straps for 'over the top' attachment (C). There's also three velcro straps that can attach to roof bars/racks. This option is suitable for SUVs. And finally you can use suction clamps (D) (not supplied) that attach to the pole in the pole sleeve. This is suitable for flat roof vehicles. sheltaPod will attach to vehicles as high as 280cm.
*Please note we do not sell the attachment equipment but they can be easily found online or at any good camping store.
Attaching to a Fiamma Awning
If you are attaching to a roll out awning then please check the diameter of the C channel. sheltaPod uses 6mm beading. If your C channel is 4mm then you will need to separately purchase a 4mm to 6mm Kador conversion strip.
Here is a link to a third party (non-affiliated) supplier -
No campervan? No Worries!
sheltaPod can attach to almost any vehicle. The simple canopy design has several attachment methods. For campervan's with multi rails or a gutter rail there is the C channel beading strip or the pole sleeve method.
For SUV's, jeeps and standard vans, we offer three velcro straps which can attach to roof bars or racks. We also include four webbing straps for 'over the top' attachment (with front and rear to stop slippage). And finally there are three gaps in the pole sleeve for attaching suction clamps.
Please note that we DO NOT INCLUDE the attachment equipment, for example the pole for the pole sleeve, 'figure of eight' for C channel and suction clamps. For more attachment information please see below.
NEW Green colour
Available now to preorder*
GREY, BLUE & ORANGE also available to preorder
How to leave sheltaPod in place when you drive away for the day
Watch the Video below
BEWARE: SheltaPod fully SOLD OUT in the summer of 2018. Limited production runs will also restrict availability in 2019, so Pre Order one NOW!
WINTER SALE - 20% OFF ALL PREORDERS FOR LIMITED TIME ONLY
A 'Bedroom' inner tent with integrated bath tub ground sheet is included in the package! Along with a front door panel, side 'privacy' panels, separate groundsheet for the rainfly and two window shades and course, all poles, pegs and guylines too!
Please note we do not supply attachment equipment other than four long webbing straps for 'over the top' attachment.
What's included in the bag
As well as the outer rainfly, each sheltaPod also comes with -
INNER TENT WITH INTEGRATED GROUNDSHEET AND TWO MESH WINDOW PANELS (with curtains) AND TWO ZIP DOORS (one mesh, one fabric)
SEPARATE FRONT DOOR PANEL WITH CENTRAL ZIP (for storing gear when not using inner tent)
TWO PRIVACY PANELS
SEPARATE GROUNDSHEET FOR RAINFLY
TWO CURTAIN SHADES FOR SKYLIGHT WINDOWS
For our current customers who received their sheltaPod in 2017
Bag Dimensions & Weight
75D 190T PU3000mm Polyester, double taped seams
Inner tent 190T breathable polyester with mesh window, roll up curtain shade, mesh and fabric doors, mesh pockets and bathtub style integrated groundsheet
Inner tent dimensions W - 230cm, D - 200cm, Max Height - 180cm
Integrated windbreaker side panels
Separate waterproof front panel with zip access for secure storage
Strong, durable aluminium tent poles
2 x telescopic upright poles and 1 x adjustable horizontal cross bar (to provide
stability and an apex for the sun canopy)
2 x curtain shades for skylight windows (we recommend attaching on the outside in hot climates to protect the windows from strong direct UV rays)
2 x internal mesh pockets on rainfly
2 x Privacy Side Panels
Separate Rainfly Groundsheet
6 x pre-attached reflective guylines
Strong tent pegs
Extra long and short guylines included
Pack size - 88cm x 24cm x 22cm
Pack weight - 11 kgs
Solo pitching time 10-15 minutes
ATTACHES TO VEHICLES HEIGHTS: 170 - 280cm
Contact telephone - +44 7495624606
Contact email - sheltaPod@gmail.com
sheltaCamp Ltd, 20-22 Wenlock Road, London, N1 7GU, United Kingdom
(registered address only, not retail store)
VAT No: GB274958058000